AUSCC

Installing an above ground pool is a much more affordable choice than building a regular below ground pool. These pools come pre-made and ready to be put in right from the warehouse. Most people may opt to consult a professional, however, there are others who would like to get totally immersed in the installation phase. It is not very hard to accomplish, although getting the help of someone else will ensure you will spend less time installing the pool.

Before you even begin, you should read the instructions and directions that come with your pool. There may be small details that will be intrinsic to each design and pool system therefore overlooking these may be detrimental to the completed project. Once you have truly fathomed all the things that must be done, then you can use this guide as a supplementary aid in the basic installation of your pool. However, if you find that you are unable to solely follow these written instructions, then referring to a video guide may also be helpful.

How To Install An Above Ground Pool

Required Materials

Pre-fabricated Pool
Sand
Gorilla Pad
Coving
Patio Stones
Concrete
Screws
Bolts
Required Tools
Shovel
Level
Drill

Instructions

To begin you will have to level the ground. This is the most important step of the process as you cannot hope to level the ground once your pool has been set up. Hence you will have to make the necessary preparations. These include, shovelling the area and making it ready for your concrete. Preparing your concrete. Putting a layer of sand on your previously shovelled ground. Pouring the concrete over this space and then placing patios sized stones as levelers to erect your pool frame. Basically, shovel, mix concrete, lay sand, pour over concrete, put in patios sized stones and let set. Once you do this correctly you are already ¼ of the way there. Assistance at this point would be great. Additionally use a level once the layer has dried to make certain that it is indeed level, if it is not, you will have to make minor adjustments like pouring more concrete or chipping down what has already been laid.
It is a great idea for you to install a bit of gorilla pad. This will lengthen the longevity of your pool’s lining. It is made out of an especially durable material which will protect your pool from common elements including rocks, grass and weeds. It is basically resistant to destruction from sharp objects. This padding will undeniably act like a cushioning for your pool. If your pool does not come pre-made with this type of padding, then obtain your own and cut it to fit the bottom section of your pool.

Set up your track and inner walls utilizing the manufacturer’s directions. At this point your drill, bolts and screws will become necessary to the process. You may install some coving which will make installing the liner an easier task and will also protect the liner as well. The coving will lower the likelihood that the metal in the pool will corrode. When contrasted to sand or dirt, cove will not be washed off and will not allow the metal to be tarnished by extra moisture.

After you may install your vinyl liner. Let it attach completely to the pool by allowing the sun to totally penetrate it, you may oblige this process for an entire day and hold off filling your pool with water until the following day.
The final part of installation includes filling the pool with water and constructing your pump and filtration system.

Your pool can then be used once all these things are put in place. However, wait a couple hours after you have put in the chlorine as this will be very harsh on the eyes. As always ensure that small children do not swim alone, and possibly consider getting a covering to stop pesky leaves and other forms of debris from entering in your pool. Have fun and enjoy.